CTD Pulvérisation logo

FIRE
products

KIT COMBINÉ : Automatic metering

Foam liquid : Concentrations adjustable from 1 to 6%, from 300 to 2,000 l/min

Wetting/Foaming additives : Concentrations adjustable from 0.1 to 1%, from 150 to 2,400 l/min


THE ADVANTAGES OF THE "SALAMANDRE + CAMELEON KIT COMBINE"

TWO METERING SYSTEMS COMBINED FOR MAXIMUM PERFORMANCE

- CAMÉLÉON : Metering with a 12 or 24 l/min piston type volumetric pump driven by a 24 V DC electric motor (powered directly from the batteries of the carrier vehicle).

This system can be used for accurate metering of wetting/foaming additives at low levels of concentration, and over a wide range of outputs.
- SALAMANDRE : Metering with a 120 or 180 l/min piston type volumetric pump driven by an electrically started auxiliary diesel engine (its diesel fuel and electrical power are supplied directly from the carrier vehicle tank and batteries respectively).

FLEXIBILITY OF USE

- Forest fires : Use with water only or with additives, in a wide range of outputs from small 150 l/min nozzles to 2,000 l/min cannons.

- Industrial fires : Possibility of using a vehicle with a 2,000 l/min cannon, mounted on the roof or on a remote holder, with major hydraulic possibilities for water or foam (the foam equipment is taken into account by the French regional industry, research and environment agencies as from 2,000 l/min).

- Fires close to hazard zones : Use of one or more nozzles with water only or water with additives, in compliance with the orders given by the crew manager.

- Rural fires : Considerable autonomy of the water carrier (8,000 to 14,000 l), increased by the additive (200 to 1,000 l) and the foam liquid (500 to 4,000 l).

EFFICIENCY

Water with wetting/foaming additives optimizes extinguishing and gives the same results using only half to one-third as much water.

This means that with a tank containing 10,000 litres of water and with 200 litres of wetting agent, one vehicle is as efficient as three ordinary water tank vehicles containing 10,000 litres each.


COMPACT AND REASSURING

This concept enables integration of all metering functions on a single, highly compact unit. Thus CTD controls the full design and quality testing procedure for the equipment it supplies. The equipment installer’s work is made easier and faster. The customer can be sure that the equipment is reliable and efficient, and that it is very well installed.

CAMÉLÉON
SALAMANDRE
MPVE
Pump Group HPM
Foam Liquid Transfer Pump
CTD Pulvérisation - environnemment
CTD Pulvérisation - négoce
 
The "KIT COMBINE SALAMANDRE + CAMÉLÉON" Concept
Kit combiné Salamandre / Caméléon
Examples of installation
Kit combiné sur FMOGP   Kit combiné sur CCGCMO SDIS 71
     
 
Home | Products | Company | News | Contact us | Open spaces | Trade
Copyright © 2005 CTD Pulvérisation - All rights reserved - conception by PMP CONCEPT